Filter Replacement Stud Kit

Replacement Filter Stud Kit. This Kit has two Studs, two Washers, and two 12 point Nuts that will work on all Clear View Filters.

• Part Number: 135

• Fastener Type: Stud

• Stud Thread Size Base: Coarse

• Stud Thread Size Top: Fine

• Fastener Nut Style: 12 Point

• Fastener Material: 8740 and Heat Treated

• Fastener Finish: Gold Zinc Plated

• Quantity: Sold as Kit; two Studs, two Washers, and two 12 point Nuts

• Notes: Can be used with all 4” and 6” Clear View Filters.

The Replacement Stud Kit is for use with all 4” and 6” Clear View Filters. This Kit contains two 3/8” x 1.900” Long Studs, which has fine thread on one end and coarse thread on the other, two AN Washers, and two 3/8” 12 point Fine Thread Nuts. Use Blue or Red Loc Tight on coarse end of stud when installing into the filter base. Use anti-seize in the threads of the 12 point nuts when installing. Should use stud installing tool or can put double nuts on the fine thread end of the stud to remove and install a stud from the filter base. Clear View Filters have four studs that rarely ever go bad when the threads are lubed.

Part# 135
Filter Stud Kit
Price $13.95